The hydraulic rotator for ferrous material grabs BINI HCS T.3.5 PIST. 360° is designed to achieve a torque of 680 Nm at a pressure of 180 bar (18 MPa) and to support an axial load of 35 kN (3500 kg). The rotation is bidirectional and continuous.
On the hardened shaft there is a 35 mm diameter hole where it is possible to insert a pin, on the outer moulded body there is a series of holes in axial direction for inserting no. 6 M16 screws and for two housing for 16 mm diameter pins.